LGEKU Job Briefing Training
A job briefing is the five minutes that decide how the rest of the shift goes. OSHA requires one for anyone working on power generation, transmission or distribution, but a requirement doesn't make it a habit. LG&E and KU needed every crew at every plant to run the briefing the same way, whether the job was routine, unplanned, or an alarm going off right now.
We produced the thirteen-minute training video that sets that standard. Filmed on location at a generating station, it opens with the rules (when a briefing is required, who leads it, what it has to cover) and then shows three real scenarios played out by plant staff: a routine generator brush inspection, a non-routine pump rebuild under lockout/tagout, and an emergent steam-leak alarm where the crew has to brief on the move. Each one shows the same conversation adapting to the risk in front of it.
Procedural training only works if people see themselves in it. That's why we shot with real crews on real equipment at the plant, so the briefings look and sound like the ones they run every day. It closes with a post-job brief and a direct appeal to frontline leaders: supervise the work the way you would if your family were doing it.
This is one of several safety training pieces we've produced for LG&E and KU since 2019, alongside the Passport contractor training and the annual Safety Summit.
About This Project
Client: LG&E and KU Energy
Type: Safety procedure training video
Location: Louisville, KY
Services: Scripting, on-location multi-scenario production, editing
Louisville's Best Training Video Production Company
John Flower Productions has produced training and internal communications video for national organizations and regional utilities since 2007. Ready to talk about your next project? Contact us.
Video Transcript:
A job briefing, sometimes referred to as a job hazard analysis or task hazard analysis, is a meeting of workers and supervisors to discuss the scope of work, tasks and hazards involved, safety precautions, and desired outcome after the task is completed. A good job briefing is also a crew participatory process of identifying and eliminating or controlling recognized hazards before commencing a task, as a means of creating a safer and healthier work environment. It ensures that everyone understands the scope of work to be accomplished, the procedural steps, his or her roles and responsibilities, as well as the hazards and controls. This dialogue creates a heightened level of awareness of the significant aspects of the task at hand.
Remember that job briefings are used to plan work and discuss the job plan among employees involved in that work. By discussing the job plan, employees have the opportunity to discuss, ask questions, and suggest improvements toward the efficiency, quality, and safety involved in performing the task. Supervisors and leaders can use job briefings to ensure employees understand what needs to be done and how to perform the work in a safe, productive manner. Job briefings are essential to the prevention of unsafe conditions and injuries, and are required by OSHA for all employees who perform work with the generation, transmission, or distribution of electrical power.
The person in charge on the job site or the work crew is responsible for completion of the job briefing. At a minimum, a job briefing is conducted daily and at the start of each job, if the scope of work changes during the day, or if a new employee is introduced to the job. A second briefing shall be conducted if work is transferred from one crew to another. A job briefing is necessary to let the new crew members understand the hazards involved.
The frequency and length of job briefings depends upon the complexity of the job. If the work or operations to be performed during the work day or shift are repetitive and similar, one job briefing before the start of the first job of each day or shift may be sufficient. A brief discussion is sufficient if the work involved is routine, and if the employee, by virtue of training and/or experience, can reasonably be expected to recognize and avoid the hazards involved in that job. Additional job briefings should be conducted if significant changes occur that might affect the safety of the employees during the course of the work. A more extensive discussion shall be conducted if the work is complicated or particularly hazardous, or if the employee cannot be expected to recognize and avoid the hazards involved in the job, or a new employee is introduced to the job.
In this video, we'll look at the planning process and three different scenarios that may better help you plan and determine the types of job briefings needed: a routine preventative maintenance task, an unplanned, non-routine maintenance or operational task, and an emergent task where something went wrong.
Prior to the brief, supervisors must take the time to walk down the task and help predetermine any known hazards that can be discussed when handing out the work. Supervisors are responsible for ensuring that the work crew understands the hazards associated with each task. The briefing is always required to touch on the following topics, which can also be found on the job briefing form: the hazards associated with the job, the work procedures and any special precautions, energy source controls or lockout/tagout, and the personal protective equipment required. In addition, the briefing should cover any notifications that need to be made prior to starting the job, tools to be used, and any other topics to ensure safe and successful job completion.
Always do the following. Identify the task's basic hazards. Communicate the work plan to the whole crew: who will do what, in what order, how will we coordinate, what tools will we need, what happens if something goes wrong. Consider: does this particular task involve any unusual conditions or distractions not present on similar jobs? Do these unusual circumstances require any special precautions to accomplish this task safely? Would it be prudent to inspect equipment before you begin? Make sure that everyone has the personal protective equipment required for the task. Most importantly, everyone involved with the job must attend the briefing prior to a job being issued.
There's planning behind the task. "All right, good afternoon, gentlemen. It looks like we have two jobs on the schedule for tomorrow. We've got a routine PM for the generator brush inspection. We also have a non-routine work order to rebuild the pump on the dewatering polymer system. So, Andy, what do we need to perform these two jobs safely?" "The maintenance support group will be doing both these jobs. There's no lockout/tagout required for the generator brush PM, but they will need a blower and a voltage meter. Rebuilding the pump for the dewatering polymer system is going to require lockout/tagout." "I'll put the card-in request in tonight, and the rebuild kit can be found in the warehouse." "I'll go ahead and check out the rebuild kit."
Let's take a look at a routine preventative maintenance task job briefing. "Josh and Keenan, you guys have been assigned the generator brush PM for today. Have either of you performed this task before?" "Yeah, I have." "I haven't." "Is there a written work procedure on how to perform the task?" "Yes, I have attached it to the pre-job form. With that, I've walked the job down. I've reviewed the procedures for the job before coming in here and I've identified the following issues. There is no lockout/tagout required for this. It is a high-noise area, so be sure to have your hearing protection in, as well as your hard hat and your safety glasses. It is a tight area, so make sure that we have clear communication and understand what we're doing before we perform the task. Do you all have anything else to add?" "No." "All right. If not, just see me after you walk the job down."
"All right, Keenan, so we need to go to the warehouse and get some brushes in case we need to change any out. We'll get the blower and the voltmeter to check the DC on the way back. As far as the hazards go, we know we don't need any lockout/tagout. It's really loud in there, so we need double ear protection, and we'll communicate with the control board so they know that we're in there. Do you know what you would need to do if something were to go wrong out there?" "Yeah, we'll just stop the work and identify what's unsafe for us." "Yeah. Sounds good. All right, you ready?" "I'm ready." "Let's go." "Good job, guys. Good luck."
As you see, a good job brief allows for open conversation, helps recognize risk and potential challenges, and avoids error-likely situations. Now let's look at a non-routine situation and how this job brief may look. "All right, guys, you've been assigned to rebuild the pump for the dewatering polymer system. Have either one of y'all done this job before?" "No." "In that case, I'm going to work with you and supervise this work. The pump has already been carded out, I have the walk-down sheet with me, and I have the rebuild kit in my office. We will perform the job brief at the pump. Do either of you have anything to add? Okay, let's go out to the pump."
"All right, guys, we're at the pump. Let's go ahead and conduct our job briefing. Getting to and from the job site, we're going to take the main roadway. Special precautions needed: lockout/tagout. We need to drain the whole system, and I've already got the pump here. The control room doesn't need to be notified, but we went ahead and notified the lab technician. All the environmental hazards have been identified, and all the material safety data sheets are available. General hazards: we've got the chemicals, handles, and pinch points. Lockout/tagout has been performed; the card is right there. The walk-down sheet's right here. The personal protective equipment we need: hard hat, safety glasses, chemical gloves, chemical apron, and face shield. No permits are required for this job. Do you all have any other questions?" "No, sir." "All right, let's get to work and be careful."
In a perfect world, all work would be pre-planned and methodically thought out before being given to a worker. However, in our lines of business, emergency situations arise at a moment's notice. In these events, what do you do? How do you respond? What actions do you take? In these situations, it's extremely important to stop and discuss potential actions to be taken within a group setting. Let's take a look at what this may look like.
"Hey, Pete, I just got an emergent alarm for HP drum level transmitter on CT2." "Okay, understand. You have an emergent alarm, CT2 HP drum level deviation." "Yes, sir, that's correct." "Okay. Mark, Weston, we need to gather over here for a pre-job brief. Gentlemen, we've got an active alarm on the HP drum level transmitter. We've got a deviation on CT2, potential steam leak as a result of that. Before we investigate, I want to make sure we confirm our communications with the control room." "Copy that. Control room, radio check." "Okay, good. What path do we want to take? The unit elevator or the stairs?" "I would say it'd be safe enough to take the elevator for now." "Agreed. Okay, good. Let's discuss our personal protective equipment. I want to see hard hat, safety glasses, hearing protection, and we're going to need some gloves. Now, why the gloves?" "If we have a potential steam leak, it's going to make anything in the area warm to the touch and will be a potential burn hazard." "What actions are we going to take when we get up to the penthouse?" "I would say first, just slightly touch the door, check and see if it's hot. And if it is, there's probably a good potential for a steam leak up there." "The next thing to discuss would be the stopping point. At what point would we vacate the investigation if we feel it's unsafe to continue?" "I would say if there's excessive noise, or if there's a line rupture, if the room was full of steam." "Okay, good. Weston and Mark, do we understand and know our roles and responsibilities?" "Yes, sir." "Yes, sir. I'll bring some danger tape, just in case we need to tape off the area." "Sounds good. Very good. Let's get started."
After the job is complete, there's still more work to do. Have a small discussion during the post-job brief to discuss what went right, what went wrong, and anything we can improve on when performing this task again.
Safety is the single most important thing we must always focus on every day and for every job. As a frontline leader, think about what level of communication and oversight you would provide if your children or loved ones were performing the work you were assigning to your crew. Provide that same level of care and concern to your crew as you would your family. Those being assigned a job, think about if you were working alongside your children or loved ones instead of your coworkers. Look out for each other's safety as you would those closest to you. Also, think about what your family would do if something happened to you on the job. If we all keep this reference in mind, this should greatly help ensure we are conducting valuable pre-job briefings and job checks, looking out for each other's safety, and significantly reducing the risk of accidents and injuries. Most importantly, as an owner of safety, it is your responsibility and right to maintain a questioning attitude and to stop when unsure. Doing this will allow employees to begin each job safe and finish strong. We can do this.