top of page

LGEKU Passport Safety Training

When a major storm knocks out power across Kentucky, LG&E and KU bring in hundreds of outside line crews from other utilities and contractors. Every one of those workers has to be briefed on LG&E and KU's rules before they touch the system: job briefings, PPE, lockout/tagout, line voltages, fall protection, traffic control. The utility calls it Passport training, and it has to happen fast, consistently, and at scale.

We produced the eleven-minute video that carries that training. It opens with a welcome from LG&E and KU leadership, moves through each safety requirement in the order a crew will meet it on the job, and closes with a review from the utility's safety leadership. Voltage tables, hold-card procedure, the "if it's not grounded, it's not dead" rule: every item a visiting crew needs is covered once, clearly, with the field footage to match.

Training like this has a hard job. The audience is experienced, tired, and in a hurry, and the content can't be skimmed. So the piece is built for retention: short segments, one idea at a time, on-screen reinforcement of the numbers, and a recap at the end that repeats the points most likely to prevent an injury.

We've produced safety and training video for LG&E and KU since 2019, including the annual Safety Summit and job briefing training. Industrial and utility clients come back to us because we understand the environment, we can shoot safely around energized equipment, and we deliver content their crews will actually watch.

About This Project
Client: LG&E and KU Energy
Type: Safety training video, contractor onboarding
Location: Louisville, KY
Services: Scripting, executive interviews, field b-roll, motion graphics, editing

Louisville's Best Training Video Production Company
John Flower Productions has produced training and internal communications video for national organizations and regional utilities since 2007. Ready to talk about your next project? Contact us.

Video Transcript:

Hello, I'm Lonnie Bellar. Welcome to LG&E and KU, and thank you for helping us restore electric service to our customers and communities. Obviously, our goal is to restore power safely and as quickly as possible. To help us achieve this, you must know certain facts about our restoration process and distribution and transmission systems. You will learn about those in the upcoming video. Most importantly, you must understand what we expect of you in terms of safety. Safety is LG&E and KU's priority and a core value. While you work for us, you must not allow anything to compromise it. We expect you to perform work according to rules and regulations and to protect yourself, your coworkers, and the public from injury. You also have the unquestionable authority to take action against hazards, correct deficiencies on the job, and even stop unsafe work until an issue is resolved. If you have any concerns about unsafe situations or conditions, stop work immediately. Then contact an LG&E or KU supervisor or safety professional or your lead person. We want you to go home in good condition, just like you arrived here. Again, I want to personally express my appreciation for your assistance during this restoration effort. Thank you, and be safe.

This video addresses a variety of topics necessary to perform work safely and effectively on LG&E and KU's distribution and transmission system. They include job site and job briefing procedures, personal protective equipment or PPE, fall protection requirements, traffic control, lockout/tagout procedures, distribution line voltages and tie breakers, transmission line voltages, and other related information. Following this meeting, you will be appointed to a lead person who will provide additional work information and guide you to a job site assigned by electric distribution or transmission control center personnel. Once you have completed a repair, your lead person will call the distribution or transmission control center for clearance to energize the line. After a line is energized and everything is in working order, that person will lead you to the next job site.

When you arrive at a job site, immediately assess the situation and conduct a thorough job briefing with all personnel. This is especially critical since you are working on an unfamiliar system. Include everyone at the site in the job briefing and update it if new personnel arrive or conditions change. The briefing should cover all work procedures, special precautions, energy source controls, PPE, potential hazards and mitigation measures for those risks. Document the briefing with the signatures of everyone involved. We require job briefing forms to be retained for 30 days after completion.

Next, ensure all PPE is in good condition and that you wear what is required. Remember, do not compromise your safety. You must always wear your hard hat, safety glasses, a reflective vest when working within 15 feet of the road, and the appropriate protective gloves for the job. We consider gloves and sleeves as one unit, so always wear Class 2 gloves and sleeves together. If required, you must wear appropriately rated arc flash clothing as well as other PPE for specialized jobs. For example, we require chaps if you are using a chainsaw on the ground. If you are ever in doubt about the appropriate PPE to wear, ask your lead person or an LG&E and KU supervisor or safety professional. When working aloft in a bucket or climbing poles or towers, you must use fall protection gear. LG&E and KU have a full fall protection policy to ensure the wellbeing of our workers and to comply with OSHA requirements. If you are going to be exposed to vehicular traffic, use proper work zone safety equipment. The goal is to establish a safe work area for your crew and the public and to provide visible, safe traffic control throughout the work zone.

Our philosophy on lockout/tagout is: if it's not grounded, it's not dead. By dead, we mean the line or equipment must be de-energized, tested and grounded. To that end, the LG&E and KU representative assigned to your crew will be responsible for requesting carding and clearance, as well as releasing carding and clearance through the appropriate system operator. A hold card must be applied to the device providing the visible opening clearance point. If your company requires you to apply your hold card, it must be placed on top of the LG&E and KU card. We practice first on and last off. Any card placed over the LG&E and KU card must include complete contact information and numbers, so we have 24/7 access to the person who placed the card. You can only proceed with testing and grounding the line after the device is open, the hold card has been applied and you have been given work clearance. LG&E and KU cards can only be removed and the devices operated at the direction of the issuing system operator. Any questions regarding lockout/tagout should be directed to your company representative or an LG&E and KU supervisor or safety professional.

These are some of the distribution line voltages that you will encounter on our system: 13,800 volts delta; 12,470/7,200 wye; 4,160/2,400 wye. The secondary voltages include 480, 277, 240, 208, and 120 volts. LG&E and KU also serve the Fort Knox area, where primary distribution line voltages include 33,000 volts. Transmission lines and equipment range from 69 to 500 kilovolts. On a related topic, electronic reclosers may or may not be operational after a lightning storm, so it is best to treat these devices as operating abnormally until verified at the control box. Secondary tie breakers are used in some of the areas LG&E serves. These breakers are normally closed and allow for adjacent transformers to share the load. The breakers are a path for a backfeed situation, which should be considered when de-energizing a line during the restoration process. Be aware of forestry management personnel who may be working in the area and communicate with them about what you are doing. They also must follow our lockout/tagout procedures. As you do so, please help ensure their safety as well. If your job requires excavation work or digging of any type, you must have underground utility lines located first. Call Kentucky 811 or the line location company for the area in which you are working, or ask LG&E and KU personnel to make the contact for you.

After you complete this Passport training, you'll be assigned a colored wristband. Keep this band on until the end of your work, as it serves multiple purposes. It signifies you have completed the safety training, and it identifies you as a legitimate LG&E and KU contractor for concerned customers and when you use company-assigned lodging and food services. You also will be assigned vehicle signage designating you as an LG&E and KU emergency contractor. Place this sign on your vehicle, leave it there for the duration of your work, and remove it when you are released. Your safety and wellbeing are our primary concern while you work on LG&E and KU's system. This is tough work. Never exert yourself past personal limitations, and stay hydrated regardless of the temperature. Stop to rest if you need to do so. If you need assistance, immediately contact your lead person. If you have any questions, concerns or suggestions, we encourage you to call our safety hotline to leave messages anonymously or with a contact number for a direct response.

Hi, I'm Eileen Saunders. My role is to ensure the appropriate practices and behaviors are in place to protect the safety and wellbeing of our employees, you, our business partners, and the public. It is your responsibility while you work for LG&E and KU to follow those practices and maintain a safety-first mindset. During this video, we have covered a great deal of information in a short time to ensure you understand what we expect of you in terms of safety and other important procedures. Let's review some of the key points one last time. We expect that you will allow nothing to compromise safety, even during the pressures and demands of the restoration effort. If you believe a job is unsafe, do not do it. Contact your lead person or one of our safety professionals to resolve the issue. Proactively look for and mitigate hazards and ensure the welfare of those around you. Start each job with a thorough, detailed briefing and document it with the signatures of everyone involved. Regularly check the condition of your PPE and wear it properly. Precisely follow all lockout/tagout procedures. Remember, if it's not de-energized, tested and grounded, then it's not dead. During the course of your work, expect company personnel to brief you about other safety-related measures such as grounding procedures, fall protection and arc flash clothing requirements. Rest if you become tired, and stay hydrated. If you work in the LG&E service area, look for the secondary tie breakers. Watch for forestry management personnel who may be working in your area. And finally, do not remove your assigned wristband and vehicle signage until you are released from work. These identify you as an LG&E and KU contractor while you work. I encourage you to also consider safety, why I care, and all the reasons to go home safely and without injury. Again, we appreciate your assistance in responding to this emergency. Thank you, and be safe.

bottom of page